- Positioning the Printer Heads, see page 20 of the SelfScore Scanner – Operator’s Guide
Scantron Remark OMR Scanner Properties Configuration
In order for the Scantron scanner hardware to work with the Remark OMR software the following settings must be configured prior to scanning.
Open the Remark Classic OMR
Navigate to Tools > OMR Scanner > OMR Scanner Properties
Change Port Number:
(Com3) usually, but check in device manager for USB COM.
- Duplex Option
- Transport printer installed
- SelfScore option installed
OMR Scanner Properties settings screen shot:
Note: Under Tools > OMR Scanner, be sure that the OMR Scanner is default by checking “Set OMR Scanner as Default”.